Small Medium Business Controller

Key Features
• For up to 200 users
• Open and modular
• Simple and user-friendly
configuration and installation
• Powerful and future-ready for customer investment protection
• Applications directly integrated in
the SMBC platform

The Mitel SMB Controller, loaded with the MiVoice Office 400 application software, is a communication server
that perfectly addresses the smaller customer segment and offers a growth potential for up to 200 users.
All the connections and control elements are accessible from the front. The display elements are arranged so that they remain visible whatever the installation position. The communication server can be expanded using interface cards and system modules.

The Loop-WDM1800 Wavelength Division Multiplexing Multi-Service Platform is designed to deliver a number of client data services by multiplexing/demultiplexing several different wavelengths into/from an optical fiber. The WDM1800 platform provides up to 15 universal plug-in slots for mounting different modules, including Transponder, Muxponder, WDM Mux/Demux filters, Optical Link Protection (OLP) modules and amplifier modules. Compact, modular and cost –effective design of the WDM1800 platform makes it easier to select suitable modules for current needs and upgradable for future requirements. With two shelf sizes and universal pluggable slots, an initial network can be deployed with low first-in cost. Future in-service network expansion is as simple as adding and configuring new modules to realize cost-effective and pay-as-you-grow advantages.

In-service passive performance monitoring on each client data and modular redundancy, enabled when dual controller modules and dual power modules are installed in the chassis, make the WDM1800 an excellent fit for mission critical applications.

The WDM1800 supports local control and diagnostics by using a VT-100 terminal  connected to the console port, and Ethernet and SFP ports for Web, Telnet, SSH, and SNMP v1/v3 management as well. Furthermore, optional Optical Supervisory Channel (OSC) can be accessed via Transponder and/or Muxponder moduleconnection for remote management.

• Full frontal access (ETSI) Shelf
• Two rack-mountable chassis types:
  • CHAa (5U)*:
    • 2 x Controller Slots
    • 2 x Power Module Slots
    • 1 x FAN Module Slot
    • 15 x Tributary Module Slots
  • CHBa (2U):
    • 2 x Controller Slots
    • 2 x Power Module Slots
    • 1 x FAN Module Slot
    • 6 x Tributary Module Slots
• Dual controller modules, dual power modules for redundancy
• Support console (RS232/USB) and Ethernet (RJ45/SFP) for local and remote management
• Support Web, Telnet, SSH, and SNMP v1/v3 management
• Compatible with SNMP-based GUI network management systems and supported by LoopiNET and Loop iNMS
• Hardened – Extended temperature range: -5 ~ +65°C
• Plug-in Module Types (all are hot-pluggable)
  • Transponder Modules
  • Muxponder Modules*
  • Wavelength Division Multiplexing (Mux/Demux) Modules
  • Optical Link Protection Modules
  • Amplifier Modules
  • Dispersion Compensation Modules (DCM)*

*Future Option

Loop-C5600 Description

The Loop-C5600 is a high density multi-services shelf designed to accept a mix of Loop series rack cards. These include the Loop-H3308R, Loop-H3304R, Loop-H3304RA, and Loop-O9340R. The C5600 provides one common controller to manage up to 15 plug-in cards and a dual controller* to manage up to 14 plug-in cards.

• For 1 controller card C5600 chassis

• • 15 single slot H3308R (2/4-pair G.SHDSL.bis)
  • 7 dual slot H3308R (8-pair G.SHDSL.bis)
  • 14 single slot H3304R
  • 14 (2Ethernet + 4E1) and 1 (2Ethernet only) H3304RA
  • 7 dual slot O9340R

• For dual controller card C5600 chassis*

• • 14 single slot H3308R (2/4-pair G.SHDSL.bis)
  • 7 dual slot H3308R (8-pair G.SHDSL.bis)
  • 14 single slot H3304R
  • 14 (2Ethernet + 4E1) H3304RA
  • 7 dual slot O9340R

• Front and back access (ANSI) unit with optional fan tray and LCD
• Supports dual controller cards*
• Number of plug-in line cards
  • Single controller with 15 slots for plug-in line cards
  • Each line card is fully independent
• Accepts rack card of type:
  • Loop-H3308R Ethernet over Bonded G.SHDSL.bis
  • Loop-H3304R High Density G.SHDSL
  • Loop-H3304RA High Density G.SHDSL.bis
  • Loop-O9340R Multi-Services Gigabit FOM
• Power modules
  • Hot-swappable DC plug-in modules(-48 Vdc: -36 to -75 Vdc), dual for redundancy
• Alarm relay
• Log in and password security protection
• Firmware download
• Configuration upload/download
• Management port and interface
  • RS232 console port with VT-100 menu
  • Two 10/100M fast Ethernet SNMP ports
  • SNMP v1 with 5 trap IP
  • Telnet with Secure Shell (SSH) protocol
  • Access Control List (ACL)
  • RoHS compliant

DIN‐Rail industrial Switches: L2 Industrial FE / DIN Switch – IP6810

The Loop-IP6810 is a self-healing ring network termination unit (NTU) with a built-in L2 switch. It can be desktop, wall or DIN rail mounted. LEAPS, RSTP or point-to-point protection is made possible in 100 Base-FX networks with the IP6810.

All end equipment can be either in packet format via Ethernet ports or serial data via RS232/485 interfaces which will be converted into packet format within the IP6810. The IP6810 has two WAN optical and electrical interfaces, two RS232/485 DTE interfaces, three Ethernet LAN interfaces, two sets of dry contact IN/OUT interfaces, and one alarm relay connector. The IP6810 comes in an industrial hardening mode to support temperatures from -20°C to 70°C (-4°F to 158°F).

The IP6810 supports auto-discovery to locate all units on the ring, and also supports remote configuration for ease of installation.Single AC, single DC or dual DC is supported based on field requirements. Power over Ethernet (PoE) option is also available.

The IP6810 facilitates automation systems, SCADA systems, surveillance systems, traffic control systems, transportation systems and IP networking with robust protection in ring, point-to-point, or omnibus-like topology. Easy installation and configuration make maintenance and further expansion more efficient and cost-effective.

• Full frontal access (ETSI) unit complies with IP30 standard
• Desktop, wall, or DIN Rail mounting
• Compact intelligent FX packet optical ring with Layer 2 switching capabilities
• WAN port with OA&M functionality
  • Dual SFP optical housing interfaces
  • Dual RJ45
• Tributary ports
  • 3 ports 10/100 BaseT Ethernet (with PoE option available in DC 48 only)
  • 2 ports RS232/485 interfaces, user selectable via 2-port DIP switch
  • 2 dry contact for input and 2 dry contact for output; support point-to-point and point-to-multi-point
• Power modules
  • On-board fixed single AC supply
  • On-board fixed single/dual DC modules with dual feed
• Auto-discovery topology, auto-diagnostic and remote-configure for easy plug-and-install (up to 64 units)
• Supports SNTP
• Ethernet Functionality
  • Loop Ethernet Automatic Protection Switching (LEAPS)
    • Fault recovery time: less than 50 ms
    • Point-to point: fault recovery time less than 8 ms
    • Up to 15 units: fault recovery time less than 25 ms
  • IEEE 802.1w RSTP
  • IEEE 802.3x Flow Control, 802.1q Port Base VLAN / Port Isolation
• Up to 1024 MAC addresses
• Built-in BERT
• High speed, asynchronous RS232/RS485 for point-to-point, point-to-multi-point, or omnibus-like applications
• Master/Slave units setting by using DIP switch
• Auto-negotiating or forced speed for speed and full/half duplex for Ethernet ports
• Full/half duplex for tributary Ethernet ports
• Alarm relay and ACO (Alarm Cut Off) button
• Remote firmware download via TFTP & Z modem
• Remote configuration upload & download via TFTP
• Management port and interface
  • In-band management
  • RS232 console via DB9 connector
  • SNMP v1, v3
  • SSH v2
  • Telnet
  • IEEE 1613, IEC61850-3 (for DC -48 Vdc only)
• RoHS compliant

Modular Access 16E1 / GE / TDMoE – IP6750

The Loop-IP6750 Service Aggregation & Access Device is an effective way for service providers to build their network and achieve a fast return on investment. Currently providers need to transport both TDM and Packet traffic. These can be achieved using the E1/T1 and Gigabit Ethernet tributary ports of the IP6750.

In addition to working now, service providers also have to build the network to meet future requirements.

The IP6750 can handle temperature ranges of 0° to 65°C. It supports many protocols such as MEF-8 CESoETH, SyncE and IEEE1588v2 Precision Timing, G.8031 Ethernet Linear Protection Switching, and a RFC2544 built-in traffic generator.

The IP6750’s durability and capabilities make it an important device for your network to meet the requirements of a carrier-grade Service Level Agreement (SLA).

Mechanical and Electrical

• 1U height, 19” width ANSI/ETSI
• Power module
  
  • AC/DC dual feed slots
  • Hot swappable
• Temperature range from 0° to 65°C

WAN Aggregate Interface

• 2 GbE ports with SFP housing
• IEEE 802.3ad Ethernet Link Aggregation
• G.8031 Ethernet Linear Protection Switching (ELPS)
• Compliant with MEF 8, 9 and 14

Timing

• Internal/Line
• External BITS I/O with RJ connector: 2 Mbps, 2 MHz, 1.544Mbps composite clock
• Adaptive Clock Recovery (ACR) and Differential Clock Recovery (DCR) for TDM Pseudowires
  
  • Jitter and Wander conforms to MEF 18, ITU-T G.8261, and G.823/824 for Traffic Interface
• SNTPv4

Tributary Interface

• 4 hot-swappable slots for the following cards:
  • CGbE: Combo Gigabit Ethernet card
    • 2 port groups per card, (1 SFP optical, 1 electric) up to 8 port groups per system
• E1 / T1 card
  
  • 4 ports per card, up to 16 ports per system
  • E1/T1 software configurable per card

OAM

• Ethernet OAM
  
  • 802.1ag / Y.1731
  • 802.3ah
• Syslog and Dying Gasp alarm

QoS

• Ingress Rate Limiting per port
• Ethernet Network Level
  
  • 3-bit Priority Code Point – PCP field within 802.1p / 802.1q Ethernet frames – CoS
  • 8 priority queues per port
• IP Network Level
  
  • 6-bit DiffServ Code Point – DSCP field – ToS
• Scheduling Algorithms
• SyncE (ITUT-G.8261) GE interfaces
• IEEE 1588v2 slave/boundary/transparent clock
• Internal stratum 3 clock (hold-over state)
• TOD interface
• 1PPS interface

L2 Switching

• 5G non-blocking switching capacity
• Jumbo frame size up to 10K bytes
• Maximum 4K VLANs
• 802.1d MAC Table Learning (maximum 32K)
• 802.3x Flow Control on input ports
• 802.1d STP, 802.1w RSTP, 802.1s MSTP
• IGMP Snooping v2 RFC 2236 and v3 RFC4604

Management

• SNMPv1/v2c/v3
• CLI command line interface
• Telnet and SSHv1/v2
• RADIUS Client
  
  • Strict Priority (SP)
  • Weighted Round Robin (WRR)
• Congestion Avoidance
  
  • Weighted Random Early Detection (WRED)
• Policing algorithm
  
  • Two-Rate Three-Color
  • Token Bucket

Pseudowires

• TDM Pseudowires
  
  • Up to 64 concurrent pseudowires
  • Pseudowire protocols
    
    • SAToP
    • CESoPSN
    • MEF-8 (CESoETH)
  • Packet Delay Variation Compensation Depth up to 256 ms

Diagnostics

• Built-in traffic generator to support RFC2544/Y.1564 and Y.1731 testing
• E1/T1 BERT & Loopback
• Ethernet loopback

SDH / SONET Integrated Access MUX – O9550R-D

The Loop-O9550-D SDH SONET IMAP (Integrated Multi-Service Access Platform) is an economical STM-1/4 (OC-3/12) access multiplexer. It is designed to combine digital access interfaces, including TDM, IP, and voice interfaces into STM-1/4 (OC-3/12) optical lines for convenient transport and switching.

Description

The Loop-O9550-D SDH/SONET IMAP (Integrated Multi-Service Access Platform) is an economical STM-1/4 (OC-3/12) access multiplexer. It is designed to combine digital access interfaces, including TDM, IP, and voice interfaces into STM-1/4 (OC-3/12) optical lines for convenient transport and switching.

This unit is a full cross-connect; one or more of the WAN ports can be used as a Drop & Insert function with fractional E1/T1 lines, which can be muxed into a full E1/T1 line.

The O9550-D provides two optical line signals at STM-1 (OC-3) or STM-4 (OC-12) with protection schemes including MSP 1+1 and SNCP protection in both ring and linear network topologies.

Redundancy is available in dual CPU controllers and power supply options, making the O9550-D an excellent fit for critical applications.

The O9550-D supports local control and diagnostics by using a VT-100 terminal connected to the console port. The O9550-D also supports Ethernet, Telnet, SSH and SNMP so that it can also be controlled and diagnosed from remote locations. An in-band management channel with GUI is available. LED indicators for all plug-in cards are also available.

Future option

• • 2U height, full front access (ETSI) shelf
  • ADM, TM, and cross-connect
  • Support of DS0 DACS (Digital Access Cross-Connect System) with full cross-connect
  • Dual controller, dual DC power with load sharing or single AC power card support
  • 1 for 1 protection, Y-BOX, E1, T1, FOM
  • PDH ring protection, FOM, Mini QE1
  • Console, Telnet, SNMP, and Inband management support
  • Compatible to a SNMP-based GUI network management system and supported by iNET and Loop iNMS*
  • All the plug-in cards are hot-pluggable

Multi-service Access Node SDH / SONET / TDM / IP – O9500R

The Loop-O9500R SDH/SONET IMAP (Integrated Multi-Services Access Platform) is an economical STM-1/4/16 (OC-3/12/48) access multiplexer designed to provide integrated access to STM-1/4/16 (OC-3/12/48) optical lines.